Basic Info.
Product Description
It is suitable for demolition and crushing of concrete structure and brick structure buildings. The root with special steel sheet, is conducive to steel shear, recovery.
Main Features:
1. The adoption of special slewing support provides stable perfomance.
2. The shear uses imported steel material,with double-layer wear -resisting protection,high strength amd long service life.
3. The strcution is optimized by design and hai large shear.
Selling point:
The cutting mouth adopts imported material, with wear-resisting welding wire, and the pattern design is more wear-resisting and beautiful.
The body adopts Q355B manganese plate design with high strength, light weight and good wear resistance.
Two times of paint, thickness 40-50min fine paint surface, rust proof.
The cylinder is thickened and lengthened for greater shear force.
CNC head boring process with high accuracy, high concentricity, more durable.
Its unique design and innovative way to ensure efficient operation and strong cutting force, powerful cylinder to strengthen the mouth closing force to shear hard concrete.
Suitable for demolition of all buildings, concrete crushing, root with steel sheet, conducive to steel shear, recycling.
12 15 18Tons Excavator Attachment Hydraulic Demolition Shear for E110 E120 E180 Building Demolition
| Company | Guangzhou Huilian Machinery Equipment Co,.Ltd |
| Brand | Huilian |
| Product Name | Excavator Hydraulic Demolition Shear |
| Condition | 100% new |
| Part Model | HL150JQ-2 HL200JQ-2 HL300JQ-2 HL350JQ |
| Main product | Excavator parts and Hydraulic breaker parts |
| MOQ | 1PCS |
| Warranty | 6-12 Months |
| Delivery Terms | After got your payment |
| Payment Terms | T/T,PayPal,Ali Pay,West Union,Bank Transfer |
| Shipping Methods | DHL,FEDEX,EMS,UPS,by sea |
Detail Photos
Our Hydraulic Demolition Shears Product Parameter
| Item/Model | Unit | HL150JQ-2 | HL200JQ-2 | HL300JQ-2 | HL35 0JQ |
| Overall Length | mm | 2050 | 2350 | 2350 | 2590 |
| Maximum Opening | mm | 740 | 900 | 910 | 1100 |
| Blade length | mm | 160 | 180 | 180 | 180 |
| Rotating flow | L/min | 30-50 | 40-60 | 40-60 | 40-60 |
| Rotating pressure | kg/cm2 | 100-130 | 110-130 | 110-150 | 110-150 |
| Operate flow | L/min | 150-180 | 160-200 | 160-200 | 180-260 |
| Operate pressure | kg/cm2 | 220-250 | 280-320 | 280-320 | 280-350 |
| Weight | kg | 1310 | 2200 | 2300 | 2800 |
| Head shear force | ton | 55 | 72 | 72 | 90 |
| Middle shear force | ton | 85 | 116 | 116 | 152 |
| Root shear force | ton | 160 | 268 | 268 | 288 |
| Suitable Excavator | ton | 12-18 | 18-24 | 24-36 | 36-40 |
Product Warranty Details As Following
| Part name | Warranty period | Warranty scope |
| Main part | 12 months | Steel plate cracking in 3 months, replacement of cracking parts.more than 3 months within 6 months of steel plate cracking company to provide maintenance, the company does not bear any other costs. (Damages caused by non-compliance with the operation specifications are not within the scope of compensation for cracking caused by reinforcement without the consent of the company).6-12months, provide maintenance, the company does not bear any other costs. |
| pivoting support | 6months | Free replacement of new products within 3 months of rotation support fracture, free maintenance within 6 months. If lubricating oil is not added according to regulations, oil seal replacement time is exceeded, and regular maintenance is poor, the rolling body and rollaway nest are stuck and corroded, which are not within the scope of claim, and the tooth wear in the ring is not within the scope of warranty. |
| Oil cylinder | 6months | Oil seal leakage within 3 months, free of charge oil seal, cylinder and piston rod cracking and fracture free of charge replacement of new products, free maintenance within 12 months for any problems, only charge for the replacement of accessories. The freight of return to factory shall be borne by oneself. |
| Motor | 6months | Shell cracking company provides free maintenance within 12 months, return to the factory to bear the freight. Output shaft fracture is caused by excessive pressure or illegal operation, so it is not covered by warranty. Oil leakage of more than 3 months is not within the scope of claims must be purchased by their own oil seals. |
| pipeline | 3months | The manufacturer is not responsible for the damage caused by improper maintenance and excessive adjustment of the pressure of the overflow valve after external force collision. |
| The valve block | 3months | Foreign bodies in the hydraulic oil, over the oil seal replacement time, poor regular maintenance, user error, external impact, stuck and strain after a month, ,are not within the scope of claim. |
| blade | 1month | Blade edge, slag, scratches, replace new. Breakage, loss, and due to operation, not covered by warranty. |
| All kinds of bolts, shaft pins, joints, foot switches are not guaranteed, all broken parts are not covered by warranty. | ||
Product maintenance
1. Daily checkpoints
Whether there is any damage or deformation of the body, whether there is leakage of the hose connection,pin and bushing damage check and its replacement cycle, check the loosening state of bolts and nuts, check the oil level and loosening of the gear and tighten the loosening bolt.
2. Regular checkpoints
The seals and rotating parts of the hydraulic cylinder will wear out, and should be replaced in time after reaching the service life. Replacement parts should be matched with the original factory.
3. Check the tightening state of bolts and install new bolts. Check and ensure that the bolts tightened are not loose after 8 hours of use. The damaged bolts should be replaced in time. Bolts should be replaced after approximately 1500 hours or 12 months of use after installation.
4, in the process of use, it is recommended to check regularly whether there is oil leakage to ensure no fault, so as not to affect the normal use.
Every 4 hours : add lubricating oil, lubrication shaft pin and rotating gear 1 time.
Every half a year or 1000 hours (whichever comes first): replace the hydraulic cylinder oil seal and motor oil seal once. If the oil seal is not replaced within the specified period, there is a certain probability that other parts of the product will be damaged, for example, the cylinder will be strained.
Special notes on operation and use of demolition hydraulic shear:
Only reasonable and correct use of a good product can effectively improve work efficiency, but also ensure the service life of the product, so the following special notes must be read carefully before use:
1. Demolition shear cylinder shear pressure 250-320kg, motor rotary pressure 80-100kg, rotary flow per minute 25-35L, Excessive pressure
flow will cause damage to the motor and support gear (rotation speed shall not exceed 10r min)!!
2. Before the first use of the equipment must be filled with butter, ensure that each butter nozzle filling thoroughly, use again 1 times /4 hours. Before using the equipment, all the stop valves of the four small arm iron pipes must be opened to prevent one-way oil from damaging the motor.
3. Demolition shear can not rotate when cutting materials, easy to cause damage to the motor and slewing support.
4. All blades shall not be cut quenched material, alloy steel, recycled iron and rail, which can easily cause blade collapse. Bear in mind: the phenomenon of collapse of knife and blade occurs instantly in shear heat treatment.
5. It is forbidden to use demolition shear to hit steel and move, push and pull heavy objects.
6. Pay attention to regular maintenance and daily inspection. If oil pipe leakage and bolt looseness are found need to reinforce timely .Retract the cylinder when placing for a long time.
Good equipment depends on use and maintenance!
Company Profile
Guangzhou Huilian Machinery Equipment Co., Ltd
Guangzhou Huilian Machinery Equipment Co., Ltd. is a professional development, production and sales of hydraulic crushers,quick couplers, high frequency vibration crushers, hydraulic shears, hydraulic crushers, stone apples, log grabs and other accessories for construction machinery.
Hydraulic grapple is widely used for handling, loading and unloading materials, sugarcane, wood, stone, steel slag, grabbing ,garbage, scrap metal and other special operations, As one of the leading Excavator attachment manufacturers in China, Huilian has a full range of grapples suitable for all kinds of brands excavators.
Applications
Certifications
Q: Are you a manufacturer?
A: Yes,our factory was established in 2010.
Q: Are you sure your product will fit my excavator?
A: Our equipments are suitable for most excavators. Show us your excavator model, we'll confirm the solution.
Q: Can you produce according to customers' design?
A: Sure, OEM/ODM service available. We are professional manufacturer in Guangzhou, China.
Q: What's the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.
Q: How about delivery time?
A: 5-15 work days after the payment.
Q: How about the package?
A: Our equipments packed by pallet or polywood case; or as requested.
Q: Which country have you exported?
A: Saudi Arabia, America, Thailand, Cyprus, India, Canada, Australia, Peru, Egypt, Brazil, Mexico, South Africa, etc.